var gaProperty = 'G-4SK8KFVV84'; {$plugin.tx_cookieconsent.tracking.leadinfo}

Select your location:

You are here: 
Tandem Weld

Tandem Weld - Efficient welding times two

Tandem Weld can be universally applied either for thin or for thick plate welding. In the Tandem Weld process, two arcs burn in a common molten pool. The process is based on two electrically separated processes which match each other perfectly. This possibility opens up a multitude of combinations. The front wire ensures a safe penetration, the back wire quickly fills big joints with filler material. The high deposition rate can result in weld speed or in volume filling. Therefore, Tandem weld is suitable for thin and for thick plates. With Tandem Weld you reduce your welding times due to the high deposition rate. You reduce the component distortion and avoid extensive reworks thanks to the low heat input. You compensate material tolerances due to the good gap bridging ability. You benefit from the wide range of applications as Tandem Weld can be used for many materials and thicknesses. Do you wish to maximise the efficiency of your weld production? Then rely on Tandem Weld by CLOOS!

  • Maximum weld speed because of high deposition rate
  • Reduced component distortion thanks to low heat input
  • Compensation of material tolerances due to good gap bridging ability
  • Steel
  • High-strength steel
  • Aluminium
  • Chrome-nickel materials
  • Coated plates
  • Universally applicable
  • Thin to thick materials
  • Automated welding
  • Welding with a high duty cylce
  • Applications requiring high deposition rates
Process Video
Process Video

Tandem Weld in action

Watch the video
Questions about the process

Your contact person
Christian Paul
Tel.: +49 (0)2773/85-565

Write an e-mail
CLOOS Process brochure
CLOOS Process brochure
Overview of our processes
Download now
CLOOS Tandem Synergy Pro
CLOOS Tandem Synergy Pro
New Tandem Weld functions for efficient welding
Download now

Click here to find suitable solutions

View solutions